Rack Buffer Stocker

This Rack Buffer Stocker, installed between the main equipment, is an in-line device that minimizes the downstream process line ?s waiting time, and feeds and discharges boards in the first-in-first-out process.

NG Buffer Stocker (Chain Type/AOIéÄ)

This NG Buffer Stocker is an in-line device that loads defective PCBs returned from the inspection unit while passing good PCBs to the downstream process line.

Connection Conveyor

This connection conveyor connects the main equipment.

Cooling Buffer Conveyor

This cooling buffer conveyor includes PCB cooling and buffer functions and connects with the main equipment.

Under Thru Gate Conveyor

This gate conveyor is used as an intermediate passage conveyor to reduce the moving distance of the operator.

Joint Conveyor

This joint conveyor allows the reference level between the upstream process equipment and downstream equipment to be changed.

Magazine Loader

This unloader automatically feeds PCBs loaded on the magazine rack to the downstream process line using a pusher.

Vacuum Loader

This vacuum loader is used for both picking up bare PCBs by vacuum and transferring them to the downstream process line. It can be incorporated in the line along with the magazine loader for efficient operation.

Magazine Loader

This magazine loader automatically feeds PCBs loaded on the magazine rack to the downstream process line using a pusher.

Inverter

This inverter reverses a PCB by 180¡Æ allowing the operator to work on either side of the PCB.

NG Buffer Stocker (Magazine Type/AOIéÄ)

This NG Buffer Stocker is an in-line device that loads defective PCBs returned from the inspection unit while passing good PCBs to the downstream process line.

Turning Conveyor

This turning conveyor connects the narrow production line by allowing the direction to be changed by up to 90 degrees.

Magazine Unloader

This equipment automatically loads a PCB on the magazine rack using a pusher.

Magazine Unloader

This unloader automatically loads PCBs onto the magazine rack using a pusher.

Shuttle Dual Unloader

This dual unloader effectively sorts between good and defective PCBs, transferring them to the shuttle conveyor from the inspection unit before loading.

Vacuum & Magazine Loader

This magazine loader is used for both picking up bare PCBs by vacuum and feeding them to the downstream process line, and automatically feeding the PCBs loaded on the magazine rack to the downstream process line using a pusher.

Shuttle Gate Conveyor

This gate conveyor is used as an intermediate passage conveyor to reduce the moving distance of the operator.

Work Table/ Work Station

This equipment is used to inspect PCBs.